Many of you have bought the POCO X6 Pro recently. We’ve received numerous comments on our blog asking how to Root POCO X6 Pro in 2024 with HyperOS Android 14. In today’s blog, we’ll explain in detail how to root HyperOS, which has changed a lot in 2024. Pay close attention and follow each step carefully to successfully root HyperOS Android 14 on your POCO X6 Pro.
To Root any Android phone in 2024 you need to first unlock the bootloader of the phone. So if you the POCO X6 Pro HyperOS users than read our HyperOS unlock Bootloader Guide here, after following the guide you can easily root your phone with the help of Magisk Manager.
Rooting an android phone has so many benefits, after rooting your phone you can easily remove unwanted apps from your phone, customize it as per your need, make so many changes and modified system as per your need.
How to Root POCO X6 PRO in 2024
Here we will provide all the download links and guide which you can use to root your POCO X6 Pro. Do take the full backup first, backup is always recommended when you try to make changes on your phone’s system.
DISCLAIMER:
To ROOT Android phone in 2024 requires an unlock bootloader, which will wipe all the data from your phone. So do take the full backup of your phone.
Technobuzz.net is not responsible for any damage that might happen to your phone during this process. You’ll lose all your data upon unlocking the bootloader.
Prerequisites to Root POCO X6 Pro
- Make sure its battery is at least 60%.
- Install Magisk Manager app on your Android phone to patch Boot img
- Install ADB drivers on your PC here, so you can connect your Phone to the PC successfully.
- Setup Platform tools on your Windows PC to run the fastboot commands.
Patch Boot Image With Magisk App and Root HyperOS
1. In this method you have to get the init_boot img file of your phone, You can get this file from your HyperOS Fastboot ROM, or you can get the init_boot img from the HyperOS Recovery ROM of your Phone. But for that you have to extract the payload file. Here is the full guide on how to get the Boot.img of your Android.
2. Once you have the init_boot.img of your POCO X6 Pro Android 14 HyperOS phone. Now the next step is to patch this file with Magisk manager app.
3. Run the Magisk Manager App on your POCO X6 Pro phone and follow the below mentioned steps to start the rooting process.
4. Tap on Install “Select and Patch a File.”
5. Navigate to the location where you copied init_boot.img file on your POCO phone and select the same file to patch with the magisk app. See the screenshot below for reference.
6. Now wait for the patching process. The patched init_boot image (magisk_patched.img) file can be found in the “Downloads folder.”
7. Now save the HyperOS Patched init_boot img on your computer. Now you need a PC to Flash this file on your Android Smartphone.
8. Install the ADB drivers and Platform Tool from the download link above and set up them on your PC to follow the next steps.
9. Afte install installing the drive. open the Platform Tools folder and run the Command Prompt window on the folder, by typing cmd on the address bar of the platform tool folder.
10. Now, reboot the bootloader menu. You can either do this by holding the power and volume down buttons while booting up, or by entering the following ADB command:
adb reboot bootloader
11. Once your phone in bootloader mode. You will now have to execute the following command in the CMD window to flash the patched init_boot.img.
fastboot flash init_boot_a magisk_patched_boot.img fastboot flash init_boot_b magisk_patched_boot.img
10. Once the image is flashed, run the following command to reboot your phone.
fastboot reboot
11. Now the POCO X6 pro HyperOS phone is rooted. Enjoy Rooting !!
Video- Root POCO X6 Pro
.
If you like our article then follow us on Instagram, or join our Telegram Group. For the latest Tech Related News, Tips, and How-to Guides, follow Technobuzznet on Twitter and Facebook, and subscribe to our Youtube channel.
